55 - 240
1,800
Bore diameter (mm)
Combined Clutch/Brake unit with pneumatic control
Brake Torque (Nm)
Rotation (rpm)
Locking device
HT series
90,000
Clutch Torque (Nm)
70,000
Low inertia
Allowed
Punto di forza
Download
HT series catalogue
Form
Fill in and send the form to find the product best suited for you
Main features
This series is a combined Clutch/Brake unit with pneumatic control and dry friction material. It’s generally used to engage and brake any industrial machine (eccentric presses, knuckle joint presses, metal stamping, edge banders, punching presses, deep drawing press machines, mechanical shears, hot forging, etc…). It represents the first evolution of the KB series. With the same dimensions, reduced inertia was obtained with greater torques, both for the brake and the clutch. It is available in a mixed construction of spheroidal graphite iron and aluminium alloy, strong and light at the same time.
The clamping to the shaft is carried out with keyways or with clamping device on the Clutch side and on the Brake side.
▪️100% Made in Italy
▪️Tested before delivery
▪️Customizable on request
▪️Always on stock!
Brake
Clutch
Air inlet
Rotary union
arrow_upwardLocking device
Internal clamping device type connection
Brake
Clutch
Air inlet
Rotary union
arrow_upwardShrink-Disk
External Shrink-Disk type connection Brake
RELATED PRODUCTS
Rotary unions / R series
+ info
Catalogue
Max temperaturearrow_forward_ios 80°C
Max rotation speedarrow_forward_ios 3,000 rpm
Max pressure:
Airarrow_forward_ios10 bar
Vacuumarrow_forward_ios700 mm/hg
Rotary unions for air or vacuum, designed for high rotational speeds
warning
![american flag](https://www.ompisrl.com/en/wp-content/uploads/2021/11/Usa.png")
EN![bandiera dell'italia lingua italiana](https://www.ompisrl.com/en/wp-content/uploads/2021/11/Italia.png")
IT![bandiera](https://www.ompisrl.com/en/wp-content/uploads/2021/11/Cina.png")
CN